A practical ortho-rearrangement of silyl group of ortho-bromophenyl silyl ethers using magnesium(0)

A practical synthesis of ortho-silyl-substituted phenol from ortho-bromophenyl silyl ethers without using RLi is described. Various ortho-bromophenyl silyl ethers are treated with commercially available Mg turnings, which are easy to handle in air, and transfer of the silyl group to the ortho-position occurs in good to high yields. Selective mono-magnesiation of 2,6-dibromophenyl silyl ether is observed even in the presence of excess Mg, and ortho-bromo-6-silylphenol is obtained as the predominant product. The obtained ortho-silyl-substituted phenol is formylated with (CH₂O)_n/MgCl₂/Et₃N, and then condensation with a diamine leads to a silyl-substituted salen-type ligand in a good yield. This scheme is suitable for the large scale synthesis of silyl-substituted salen-type ligands bearing imine groups.     

Simple preparation of phenylpropenoid β-d-glucopyranoside congeners by Mizoroki-Heck type reaction using organoboron reagents

Palladium(II)-catalyzed carbon-carbon bond formation between allyl 2,3,4,6-tetra-O-acetyl-β-d-glucopyranoside (3) and arylboronic acid congeners gave the corresponding cinnamyl 2,3,4,6-tetra-O-acetyl- β-d-glucopyranosides (4a-m) in good yield. Among them, coupling products 4a-m were converted to not only the naturally occurring phenylpropenoid β-d-glucopyranoside analogues (1a-e) but also the unnaturally ones (1f-m).     

Porphyrin gels reinforced by sol-gel reaction via the organogel phase

Porphyrins bearing four urea-linked dodecyl groups (3a) or four urea-linked triethoxysilylpropyl groups (3TEOS) at their peripheral positions were synthesized. 3a tends to assemble into a sheetlike two-dimensional structure due to the predominant hydrogen-bonding interaction among the urea groups and acts as a moderate gelator of organic solvents. On the other hand, its Cu(II) compelx (3a.Cu) tends to assemble into a fibrous one-dimensional structure due to the predominant porphyrin-porphyrin pi-pi stacking interaction and acts as an excellent gelator of many organic solvents. 3TEOS and 3TEOS.Cu, which also act as gelators, afforded similar superstructures as those of 3a and 3a.Cu, respectively, and as evidenced by SEM and TEM observations and XRD measurements, the original superstructures could be precisely immobilized by in situ sol-gel polycondensation of the triethoxysilyl groups. The TEM images of 3a gels and 3TEOS gels after sol-gel polycondensation showed a fine striped structure, the periodical distance of which was either 2 or 4 nm. X-ray crystallographic analysis of a single crystal obtained from a reference porphyrin bearing four urea-linked butyl groups revealed that there are two different porphyrin-stacked columns in the crystal and both the 2 nm distance and the 4 nm distance can appear, depending on the observation tilting angle. The hybrid gel prepared from 3TEOS.Cu by sol-gel polycondensation showed unique physicochemical properties such as a high sol-gel phase-transition temperature (>160 degrees C), sufficient elasticity, high mechanical strength, etc. Thus, the present study has established new concepts for molecular design of porphyrin-based gelators on the basis of cooperative and/or competitive actions of hydrogen-bonding and pi-pi stacking interactions and for immobilization of their superstructures leading to development of new functional organic/inorganic hybrid materials.     

Preparation and interfacial properties of a novel biodegradable polymer surfactant: poly(ethylene oxide monooleate-block-DL-lactide)

In this paper, we report a novel synthesis of poly(ethylene oxide monooleate-block-DL-lactide) (MOPEO-PLA) in the presence of stannous 2-ethylhexanoate catalyst. By utilizing the surfactant property and the reactive double bond of the amphiphilic MOPEO-PLA, various characteristics of PLA microspheres, such as surface and internal structure, surface morphology, release property, and so on, may potentially be controlled. MOPEO-PLA was found to be hydrophobic enough to prevent loss by dissolution into aqueous solution, which is often a problem for MOPEO. Furthermore, the interfacial tension measurements of a MOPEO-PLA/toluene/water system revealed that MOPEO-PLA had a good surface activity almost equal to that of MOPEO. The MOPEO-PLA/PLA blend films were prepared by solvent casting on a water layer. Contact-angle measurements of MOPEO-PLA/PLA blend films confirmed that the hydrophilic PEO segments were selectivity accumulated at the oil/water interface. Moreover, the surface free energy on the 'water side' of the MOPEO-PLA/PLA blend films was increased because of the increase in polar components as a result of the ether bonds of the PEO segments. Schematic illustration of the adsorption property of a) MOPEO-PLA with a high-molecular-weight PLA segment and b) MOPEO-PLA with a low-molecular-weight PLA segment at an ethyl acetate/water interface.     

Reaction modes of oxidative dimerization of epoxycyclohexenols

Of the 16 possible modes of the oxidation-6π-electrocylization-Diels-Alder reaction cascade for an epoxyquinone, and eight for a 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero are respectively observed, while both the endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with epoxy-4-hydroxycyclohexenones owing to a hydrogen-bonding interaction.     

Application of shielded column liquid chromatography for determination of sulfamonomethoxine, sulfadimethoxine, and their N4-acetyl metabolites in milk

A hazardous-chemical free method for simultaneous determination of sulfamonomethoxine (SMM), sulfadimethoxine (SDM), and their N4-acetyl metabolites in raw milk using shielded column liquid chromatography is developed. The target analytes are extracted by mixing with ethanol-acetic acid (97:3, v/v) followed by centrifugation. The procedure uses a Hisep shielded hydrophobic phase (SHP) column, isocratic elution with 0.1% acetic acid solution (pH 3.1, in water)-ethanol (75:25, v/v), and a photo-diode array detector. Average recoveries from samples spiked at 25-500 ng/ml for each drug were >81% with relative standard deviations within 5%. The limits of quantitation were <25 ng/ml.     

Tuning of electronic structures of quasi-one-dimensional bromo-bridged Ni(III) complexes with strong electron-correlation by doping of Co(III) ions, [Ni(1-x)Co(x)(Chxn)(2)Br]Br(2)

We have succeeded in synthesizing the Ni(III) complexes doped by Co(III) ions, [Ni(1-x)Co(x)(chxn)(2)Br]Br(2) (x = 0, 0.043, 0.093, and 0.118) by using an electrochemical oxidation method. The single-crystal reflectance spectrum of x = 0.118 shows an intense CT band about 0.5 eV, which is lower than that of [Ni(chxn)(2)Br]Br(2) (1.3 eV). The single-crystal electrical conductivities at room temperature of these compounds increase with increase of the amounts of doping of Co(III) ions. In the ESR spectra, peak-to-peak line widths DeltaH(pp) at room temperature change about 600 G in [Ni(chxn)(2)Br]Br(2) to 200 G in x = 0.118. Such a large x dependence of DeltaH(pp) seems to be ascribed to the increasing contribution from the increasing Curie spins which have smaller line width. Therefore, we have tuned the electronic structures of quasi-one-dimensional bromo-bridged Ni(III) complexes with strong electron correlations by doping of Co(III) ions.     

Simultaneous determination of sulfamonomethoxine, sulfadimethoxine, and their hydroxy/N(4)-acetyl metabolites with gradient liquid chromatography in chicken plasma, tissues, and eggs

A simultaneous determination of sulfamonomethoxine, sulfadimethoxine, and their hydroxy/N⁴-acetyl metabolites in chicken plasma, muscle, liver, and eggs using gradient high-performance liquid chromatography (HPLC) with a photo-diode array detector is developed. All the compounds are extracted by a handheld ultrasonic homogenizer with ethanol followed by centrifugation. The separation is performed by a reversed-phase C4 column with a gradient elution (ethanol:1% (v/v) acetic acid, v/v; 10:90 → 20:80). Average recoveries from samples spiked at 0.1-1.0 μg g⁻¹ or μg ml⁻¹ for each drug were >90% with relative standard deviations within 4%. The limits of quantitation were <30 ng g⁻¹ or ng ml⁻¹.